Air Traffic Controller Initial Training in Europe: Basic, Rating and Unit Training
Passing a selection test gets you a training place, not a licence. In the European Union, everything between that place and your first solo shift on live traffic is set out in one regulation, and it splits the journey into two blocks: initial training at an approved training organisation, then unit training at the unit where you will work.
This guide follows Part ATCO of Commission Regulation (EU) 2015/340, as amended by Implementing Regulation (EU) 2023/893, whose changes have applied since 4 August 2024. It uses EASA's Easy Access Rules for air traffic controller licensing, revision of March 2024, which also contain EASA's guidance material. The regulation sets the minimum framework. Course length, timetables and pay are decided by each air navigation service provider and training organisation, so the details of your own course will differ. Pages were checked on 20 November 2026.

Photo: Ludvig Hedenborg / Pexels. The control tower at Stockholm Arlanda Airport, used here as an illustration.
The three types of controller training in EU rules
Point ATCO.D.005 sorts controller training into three types. Initial training leads to a student air traffic controller licence and is made of basic training and rating training. Unit training leads to the full air traffic controller licence and the unit endorsement for a specific unit. Continuation training, which means refresher and, where relevant, conversion training, keeps the endorsements valid during a career.
A trainee meets the first two. The rest of this guide follows them in order.
Basic training: the common foundation
Basic training covers every subject, topic and subtopic in Appendix 2 to Annex I of the regulation, and it is the same for every applicant regardless of the rating they will hold. It ends with theoretical examinations and practical assessments. To pass an examination you need at least 75 percent of the marks allocated to it. The assessments run on a part-task trainer or a simulator.
Point ATCO.D.030 lists what those assessments evaluate. Among the thirteen performance objectives are using the working position equipment, building and keeping situational awareness, keeping a continuous listening watch on the frequency, using approved phraseology, applying separation and coordination, detecting potential conflicts and choosing the right separation method. A pass requires that you show the required performance consistently, together with the behaviour needed for a safe service.
EASA's guidance notes that rating training may begin before basic training is finished. The two can be run as separate courses or as one integrated course, but in an integrated course the examinations and assessments for basic training and for each rating must be kept clearly apart.
Rating training: the six controller ratings
Rating training teaches the knowledge and skills for a specific rating. Initial training must include at least one of six rating syllabi, each defined in its own appendix to Annex I:
| Abbreviation | Rating |
|---|---|
| ADV | Aerodrome Control Visual |
| ADI (TWR) | Aerodrome Control Instrument for Tower |
| APP | Approach Control Procedural |
| ACP | Area Control Procedural |
| APS | Approach Control Surveillance |
| ACS | Area Control Surveillance |
The pass rule for theory is the same 75 percent, but rating assessments must take place on a simulator. Under point ATCO.D.040 they test whether you can manage traffic in a safe, orderly and expeditious way and handle complex and dense traffic situations.
When initial training is complete, the training organisation issues a certificate. A certificate for basic training alone is issued only if the applicant asks for one.
The student air traffic controller licence
Point ATCO.B.001 sets four conditions for a student licence. The applicant must:
- be at least 18 years old;
- have completed initial training at a certified training organisation within the 12 months before applying;
- hold a valid medical certificate;
- have demonstrated adequate language proficiency under point ATCO.B.030.
The licence lets you provide air traffic control under the supervision of an on-the-job training instructor, known as an OJTI. If you do not start using it within a year of issue, or stop for more than a year, you may only start or continue on-the-job training after a certified training organisation has assessed whether your earlier competence still meets the requirements for that rating. For the medical and language requirements, see our guides to the Class 3 medical and the ELPAC English test.
Unit training: from the simulator to live traffic
Unit training can begin once initial training for the relevant rating is complete, but its on-the-job phase may only start once you hold a student licence. It has up to three phases:
- Transitional training, which teaches the unit's own procedures and task-specific aspects;
- Pre-on-the-job training, required where the unit endorsement involves complex and dense traffic, to sharpen rating skills before live traffic;
- On-the-job training, the final phase, in which you work live traffic under the supervision of a qualified OJTI.
Whatever the unit, the course must cover operational procedures, task-specific aspects, abnormal and emergency situations, and human factors. EASA's acceptable means of compliance say emergency training should mainly take place on synthetic training devices.
The regulation does not set one length for unit training. Each unit training plan, approved by the national authority, states its own minimum duration, along with the examinations, which again need at least 75 percent. EASA's guidance adds that simulator hours during the on-the-job phase generally do not count towards that minimum. The decisive assessment happens in the operational environment, under normal operating conditions, at least once at the end of on-the-job training. Where there is a pre-on-the-job phase, you are also assessed on a synthetic device at its end.
The first full air traffic controller licence
Under point ATCO.B.005, an applicant for a first full licence must hold a student licence, have completed a unit endorsement course and passed its examinations and assessments, and hold a valid medical certificate and language proficiency. The licence then carries your rating, the endorsements for which training was successful, and the language endorsement. The regulation itself sets no separate minimum age for this licence beyond the 18 years required for the student licence. An employer can still set its own, as AirNav Ireland does in its careers FAQ.
Official sources and related guides
Everything above comes after selection. To see how candidates get a training place in the first place, start with how to become an air traffic controller and our guide to the AirNav Ireland selection process. For a comparison with the United States, where the FAA Academy runs initial training itself, read our guide to the FAA Academy Basics for ATC course.
- EASA: Easy Access Rules for Air Traffic Controllers' Licensing and Certification
- EASA: Easy Access Rules, revision March 2024 (PDF)
All pages checked on 20 November 2026.




